Copyright © component-shop.co.uk ltd 2011 All rights reserved Registered in England & Wales No: 5614975
|
Leads & Connectors
|
|

|
PP3 Tamiya Futaba JST & many more..
|
|
Tamiya plugs just £0.50 Male & Female connectors in stock.
|
|
Radio Control Batteries
|
|

|
High performance race packs - custom build service also available for hard to get sizes.
|
|
7.2V 5000mAh SC £
Most standard sizes stocked.
|
300/600mA Smart charger for race packs.
Charges 2, 4, 5, 6, 7, 8, 10 cell NiCd or NiMH battery packs. (2.4V, 4.8V, 6.0V, 7.2V, 8.4V, 9.6V, 12V) Delta-Peak microprocessor controlled charging, switches to trickle charge once pack is charged. Discharge function for NiCd battery packs. 300mA or 600mA selectable charging current Mains 230V UK 3-pin plug (Batteries sold seperately)
Ultra Fast, Smart charger for race packs.
Charges 5 - 8 cell NiCd or NiMH battery packs. (6.0V, 7.2V, 8.4V, 9.6V) Delta-Peak microprocessor controlled charging, switches to trickle charge once pack is charged. Discharge function for NiCd battery packs. 1,000mA or 2,000mA selectable charging current Mains 230V UK 3-pin plug (Batteries sold seperately)
Universal charger for race packs.
Charges 1 to 10 cell NiCd or NiMH battery packs. (1.2V to 12V) Output current selectable at 50mA, 80mA, 120mA, 180mA, 240mA or 300mA High quality entry-level charger. Mains 230V UK 3-pin plug. (Note: This charger does not automatically shut down once charging is complete. For automatic chargers see the others on this page.)
500/1,000mA Smart charger for race packs.
Charges 2, 4, 5, 6, 7, 8, 10 cell NiCd or NiMH battery packs. (2.4V, 4.8V, 6.0V, 7.2V, 8.4V, 9.6V, 12V) Delta-Peak microprocessor controlled charging, switches to trickle charge once pack is charged. Discharge function for NiCd battery packs. 500mA or 1,000mA selectable charging current Mains 230V UK 3-pin plug (Batteries sold seperately)
3,000mA Ultra Fast, Smart charger for race packs.
Charges 4 - 8 cell NiCd or NiMH battery packs. (4.8V, 6.0V, 7.2V, 8.4V, 9.6V) Delta-Peak microprocessor controlled charging, switches to trickle charge once pack is charged. Discharge function for NiCd battery packs. 1,000mA, 2,000mA or 3,000mA selectable charging current (1Amp, 2Amps or 3Amps) Mains 230V UK 3-pin plug (Batteries sold seperately)
|
AA 2900mAh Batteries
|
|

|
Highest capacity available in this size, especially suited to digital cameras etc.
|
|
£ / pack of 4 Supplied with free carrying case.
|
Digital Charger for 1 to 15 cell (1.2 - 18V) battery packs.
Also charges 1-6 cell Lipo packs (3.7 - 22.2V) & 1-10 cell lead-acid batteries (2.0 - 20V) Full featured charger, very versatile, will also discharge & cycle batteries. Programmable charge / discharge currents. JST-XH balance lead connections & 4mm terminals Requires external 12V dc input
- £
each.
- £
with mains power supply.
Battery Chargers for NiMH & NiCd Battery Packs.
All chargers on this page are supplied with standard Tamiya battery connection. We have a wide range of adapters available, see the bottom of this page for details (just contact us if you need one not shown.)
|

|
Futaba (also fits JR/Hitec)
|
£1.00
|
|
|

|
JST
|
£1.00
|
|
|

|
JST-EHR (Spektrum)
|
£1.00
|
|
|

|
Deans
|
£1.25
|
|
|

|
EC3
|
£1.25
|
|
|

|
XT60
|
£1.25
|
|
|

|
Traxxas
|
£1.50
|
|
|

|
Mini-T
|
£1.00
|
|
|

|
Mini-Tamiya Female R/C
|
£1.25
|
|
|

|
Mini-Tamiya Male R/C
|
£1.25
|
|
|

|
”Universal”
|
£1.00
|
|
|

|
Multiple. Includes Deans Futaba, JST 2.5mm dc jack (centre +ve for Futaba), 2.1mm dc jack (centre -ve for JR)
|
£2.99
|
|
Charger adapter leads .
All chargers on this page are supplied with standard Tamiya battery connection. We have a wide range of adapters available converting from the Tamiya connector on the charger, to that required for the battery. (just contact us if you need one not shown.)
Digital Charger for 1S to 8S (3.7 - 29.6V) battery packs. Up to 7A charge current.
Also charges 1-27 cell NiCd/NiMH packs (1.2 - 32.4V) & 1-18 cell lead-acid batteries (2.0 - 36V) Full featured charger, very versatile, will also discharge & cycle batteries. Programmable charge / discharge currents. JST-XH balance lead connections & 4mm terminals Requires external 12V dc input
- £
each. For 12V only
- £
each with mains power supply.
Digital Quad Charger for 1S to 6S (3.7 - 22.2V) lipo battery packs. Up to 5A charge current.
4 Independant chargers in 1 package. Also charges 1-15 cell NiCd/NiMH packs (1.2 - 18V) & 1-10 cell lead-acid batteries (2.0 - 20V) Full featured charger, very versatile, will also discharge & cycle batteries. Programmable charge / discharge currents. JST-XH balance lead connections & 4mm terminals Requires external 12V dc input
- £
each. For 12V only
- £ each with mains power supply.
600mA Smart charger for 7.2 / 8.4 / 9.6V Battery Packs.
Charges 7.2V (6 cell) 8.4V (7 cell) & 9.6V (8 cell) NiCd or NiMH batteries. Delta-Peak microprocessor controlled charging, automatically detects battery voltage & switches to trickle charge once pack is charged. Mains 230V UK 3-pin plug. Fitted with standard-Tamiya type connection. See below for adapters for other connectors.
|
|