800mA Charger for 2S or 3S (7.4 / 11.1V) battery packs.
Ideal for smaller batteries, but also for slower charging
of batteries. JST-XH balance lead connections
Requires external 12V dc input
Range of Chargers for Balance Chargers for Lithium Polymer (lipo) batteries.
Charge currents between 650mA and 5,000mA so there are chargers suitable for all batteries as well
as all pockets.
UK postage from
just £1 and £1
Minimum Order.

650mA Charger for 2S or 3S (7.4 / 11.1V) battery packs.
Ideal for smaller batteries, but also for slower charging
of batteries. JST-XH balance lead connections
Mains input
Digital Charger for 1S to 6S (3.7 - 22.2V) battery packs.
Up to 5A charge current.
Also charges 1-15 cell NiCd/NiMH packs (1.2 - 18V)
& 1-10 cell lead-acid batteries (2.0 - 20V)
Full featured charger, very versatile, will also discharge
& cycle batteries. Programmable charge / discharge
currents.
JST-XH balance lead connections & 4mm terminals
Requires external 12V dc input
- £39.95 each. For 12V only
- £53.95 each. For 12V & mains (includes
12V 5 Amp mains power supply.)
Battery Testers Checkers / Alarms.
LED battery status indicator for 1S to 3S (3.7 - 11.1V)
Simple green light = good, red light = low for each
cell.
LED battery status indicator & alarm for 1S to 3S
(3.7 - 11.1V)
Simple green light = good, flashing red light = low, for
each cell. Buzzer sounds when battery voltage falls
dangerously low
7-Segment display battery status indicator for 1S to 6S
(3.7 - 22.2V)
Display shows actual cell voltage, cycling through all
the cells of the battery & then starting from the
beginning again.
800mA Charger for 2S or 3S (7.4 / 11.1V) battery packs
Complete with mains power supply.
Same charger as above, but includes mains plug-top
power supply, so the charger can be used from either
a 12V battery, or 240V mains.
Digital Charger for 1S to 8S (3.7 - 29.6V) battery packs.
Up to 7A charge current.
Also charges 1-27 cell NiCd/NiMH packs (1.2 - 32.4V)
& 1-18 cell lead-acid batteries (2.0 - 36V)
Full featured charger, very versatile, will also discharge
& cycle batteries. Programmable charge / discharge
currents.
JST-XH balance lead connections & 4mm terminals
Requires external 12V dc input
- £49.95 each. For 12V only
Digital Quad Charger for 1S to 6S (3.7 - 22.2V) lipo
battery packs. Up to 5A charge current.
4 Independant chargers in 1 package.
Also charges 1-15 cell NiCd/NiMH packs (1.2 - 18V)
& 1-10 cell lead-acid batteries (2.0 - 20V)
Full featured charger, very versatile, will also discharge
& cycle batteries. Programmable charge / discharge
currents.
JST-XH balance lead connections & 4mm terminals
Requires external 12V dc input
- £99.95 each. For 12V only
Lipo safe charging bag
Simple safe way to charge lipo batteries. Should there
be a problem during charging, this fireproof bag will
contain the fire, preventing serious damage.
Safe charging practices should still be observed. i.e.
batteries should be charged in a clear, open space,
away from any combustible materials. Batteries being
charged should never be left unattended.
Size 180 x 220mm